manualshive.com logo in svg

G&D DP-HR-CON, Installation And Operations, Page: 111 / 196

Share
Download
G&D DP-HR-CON Installation And Operations Download Page 111

User module »DP-HR-U-CON-MC4«

Target and user modules (DP-HR-U) · 

106

MC3

Video 3

On

Strong video signal atthird video input.

Off

No signal at third video input, or the signal quality is too weak 

to be processed by the system.

Trans. 3

On

The communication to the counterpart station is established 

successfully.

Off

The communication to the counterpart station could not be 

established.

MC4

Video 4

On

Strong video signal at fourth video input.

Off

No signal at fourth video input, or the signal quality is too weak 

to be processed by the system.

Trans. 4

On

The communication to the counterpart station is established 

successfully.

Off

The communication to the counterpart station could not be 

established.

Video 1

Video 3

Trans. 3

Video 4

Trans. 4

Video 2

Trans. 2

K/M

Service

Console

Summary of Contents for DP-HR-CON





































































































































































































Reviews:

No comments