G&D DP-HR-CON, Installation And Operations

Page: 148 / 196

User module »DP-HR-U-CON-DH«
143 · Target and user modules (DP-HR-U)
User module »DP-HR-U-CON-DH«
With DP-HR-U-CON-DH user modules, you can connect up to two DisplayPort monitors
(dual-monitor), keyboard, mouse, microphone and speakers to a digital matrix
switch of the ControlCenter-Compact , ControlCenter-Digital or the DVICenter series by
using one cable only.
At the installed console, matrix switch users can access a target module to operate
the connected computer.
The data stream of the connected USB devices is transmitted to the active target
module of the DVI-U-CPU , DP-U-CPU or DP-HR-U-CPU series with up to 16 Mbit/s.
When using the console to access a target module connected to a dual-head com-
puter, the monitors display the separate images of the graphics outputs. When
accessing a target module with one graphics input only, only the first monitor dis-
plays an image.
Package contents
 1 × User module DP-HR-U-CON-DH
 1 × Power cable
 1 × EasyStart flyer
 1 × »Safety instructions« flyer
Required accessories
 1 × Category 5e (or better) twisted pair cable to connect the user module to a
KVM matrix switch
ADVICE: If you use the first video channel only, you are able to display resolutions
up to 4096 × 2160 @ 30 Hz (4K). Using both video channels allows resolutions up
to 1920 × 1200 @ 60 Hz. Detailed information about the supported resolutions is
given in the chapter Technical data on page 148.
NOTE:
Accessing a target module occupies the entire back channel (including Micro In
and USB 2.0 signal). Hence, these signals are not provided to the user modules that
access the channel at a later point (multi user operation).