G&D DP-HR-CON, Installation And Operations

Page: 163 / 196

User module »DP-HR-U-CON-Fiber-DH«
Target and user modules (DP-HR-U) · 158
User module »DP-HR-U-CON-Fiber-DH«
With
DP-HR-U-CON-Fiber-DH
user modules, you can connect up to two
DisplayPort
monitors (dual-monitor), keyboard, mouse, microphone and speakers to a digital
matrix switch of the
ControlCenter-Compact
or
ControlCenter-Digital
series by using one
cable only.
At the installed console, matrix switch users can access a target module to operate
the connected computer.
The data stream of the connected USB devices is transmitted to the active target
module of the DVI-U-CPU , DP-U-CPU or DP-HR-U-CPU series with up to 16 Mbit/s.
When using the console to access a target module connected to a dual-head com-
puter, the monitors display the separate images of the graphics outputs. When
accessing a target module with one graphics input only, only the first monitor dis-
plays an image.
Package contents

1 × User module
DP-HR-U-CON-Fiber-DH

1 × Power cable

1 × EasyStart flyer

1 × »Safety instructions« flyer
NOTE: This user module can be connected to a compatible fiber port of
ControlCenter-Compact
matrix switches or
ControlCenter-Digital
matrix switches
(requires
CCD-I/O 16-Card-Fiber
).
IMPORTANT: Both, the user module and the fiber ports are available as single-mode
variants or as multi-mode variants. Make sure that the port at the user module, the-
fiber port and the optical fibers are compatible with each other.
ADVICE: If you use the first video channel only, you are able to display resolutions
up to 4096 × 2160 @ 30 Hz (4K). Using both video channels allows resolutions up
to 1920 × 1200 @ 60 Hz. Detailed information about the supported resolutions is
given in the chapter Technical data on page 164.
NOTE: Accessing a target module occupies the entire back channel (including
Micro In
and
USB 2.0
signal). Hence, these signals are not provided to the user modules that
access the channel at a later point (multi user operation).