Introduction
15
Avoid using the CADIAX device directly next to other devices or stacked on top of other
devices, as this could lead to faulty operation. If, however, it is necessary to use the
device in the manner stated, the CADIAX device as well as the other devices must be
monitored to ensure they are working properly.
1.2.2.2
Operating the CADIAX device
Only switch the device into recording mode after the measuring sensors (flags and styli)
are completely mounted.
Make sure that the sensors are not touched during the registration, not by yourself nor by
the patient.
Always switch off the recording mode before detaching the flags and styli from the face
bow.
1.2.2.3
Features of the CADIAX compact 2 device enclosure
The enclosure of the CADIAX compact 2 main unit has the following features:
Front side
1
Connector socket for the measuring sensors of the right patient side
2
LED for indication of the current device status (refer to chapter "Status in-
dication of the CADIAX device
")
3
Connector socket for the measuring sensors of the left patient side
17
Summary of Contents for CADIAX compact Series
