Gamma CADIAX compact Series, Operating Instructions Manual

Page: 17 / 80

Introduction
17
Back side
6 Connector socket for the foot switch
7 Type label with information regarding the manufacturer and the device
8 USB 2.0 (type B) connector socket for the cable connection to the PC
1.2.2.5 Status indication of the CADIAX device
The CADIAX device indicates its operating state via a green LED on the front side of the enclosure. This
LED can be in the following conditions:
LED is permanently on:
Device is connected to a PC and is ready for
operation.
LED flashes with 5 Hz:
A measurement is in progress.
LED flashes with 0.5 Hz:
An internal hardware error occurred in the
device. No measurement is possible.
LED permanently off:
The device is not connected to a PC and is
turned off.
1.2.2.6 Electromagnetic compatibility
Medical electrical devices require special safety precautions with regard to electromag-
netic tolerance. Therefore, the CADIAX device may only be installed and put into opera-
tion according to the instructions contained in this manual. Failure to comply with the in-
structions herein can potentially impair the measurement accuracy stated in chapter
"Technical data
".
74