5.
Controller configuration
Following configuration options are specified at the time of order:
5.1.
Number of HV channels
DIGITEL QPC can have up to four independent HV channels.
5.2.
Output voltage polarity type for each HV channel
Following options are available:
▪
Positive polarity output voltage channel
▪
Negative polarity output voltage channel
5.3.
Type of the HV output connectors
Following are standard HV connector types for J501 - J504:
1.
SHV-10 kV (matching safeconn connector type is SMB style).
2.
Fischer (matching safeconn connector type is mini banana style) other HV
connector types are available per request.
5.4.
Number of output connectors per HV channel
There can be more than one HV output connector tied to the same HV
channel. In such case, connectors are tied in parallel.
For example, a valid configuration is HV output connectors J501 and J502
tied to HV channel one.
In this configuration, all associated safeconn connectors (J401 and J402),
must be satisfied before channel one HV can be turned on.
5.5.
Communication interface
Controller comes standard with Serial and Ethernet interface.
Profibus interface is optional.
Page 14
900031_J
900031_J - Controller configuration
