Command
code
Description
Parameter Response Data/response interpretation
0x5A
Get/set analog
output
N, S, F, O,
I, R
S, F, O,
I, R
Where:
N is analog channel (1-4)
S is supply (1-4)
O is log offset (-15 to +15)
I is inverted mode (0 for normal, 1
for inverted)
R is response mode (0 for normal,
1 for fast)
F is function:
“00” for Off
“01” for Logarithmic pressure
“02” for Logarithmic current
“03” for Volts per 1 uA
“04” for Volts per 10 uA
“05” for Volts per 100 uA
“06” for Volts per 1 mA
“07” for Volts per 10 mA
“08” for Volts per 50 mA
“09” for Volts per 1 nA
“10” for Volts per 10 nA
“11” for Volts per 100 nA
“12” for Volts per 1 kV
If only N parameter is specified,
the current analog output
configuration is returned.
0x72
Get TSP cycle on
time
T
X
where T is TSP
X is current cycle on time in
seconds
0x73
Get TSP cycle
period
T
X
where T is TSP
X is current cycle period time in
minutes
0x74
Get TSP runtime
power level
X, P
where X is level in Amps/Watts
and P is ‘A’ for Amps or ‘W’ for
Watts
0x77
Set TSP filament
auto advance
mode Set TSP
filament auto
advance mode
T, X
where T is TSP and X is new
filament auto advance mode (0
for Off, 1 for Next, and 2 for
Rotate)
0x78
Set TSP
sublimation
target level
T, X, P
where T is TSP, X is new
sublimation target level, and P is
‘A’ for Amps or ‘W’ for Watts
Page 46
900031_J
900031_J - Serial communication
