Use and Maintenance Manual – Pressure-sensitive bumpers type GSBPS
24/35
9.3
Wire connection
Wire connection to the connector 4 pole
code Female M8
Pin connections
Pin 1 - Brown wire ( C )
Pin 2 - White wire ( C1)
Pin 3 - Blue wire ( A )
Pin 4 –Black wire ( B )
Code. Male. M8
Pin connections
Pin 1 - Brown wire ( A )
Pin 2 - White wire ( B )
Pin 3 - Blue wire ( C )
Pin 4 –Black wire ( C1 )
GSCMCM8
–
Connector for electric circuit closing Male M8
Pin connections
Pin 1 - Brown wire ( A )
Pin 2 - White wire ( B )
Pin 3 - Blue wire ( C )
Pin 4 –Black wire ( C1 )
Wires connection without connector
In case the sensors have the cable without connector, the wire connection must be made by using the proper terminal
complies with local regulations
.
Exemple of wires connection with sensor and Gamma System control unit (see the manual of Unit control device))
Connectiondiagram
A
(wire brown) -
C1
(wire black)
Power sensor
C
(wire blue)
–
B
(wire black)
Fedback sensore
Connection diagram of
Two bumpers
A
(wire brown) Power sensor
B
(wire black) Feedback sensor
C
(wire blue) Sensor 1 in serie with
A
(wire brown) Sensor 2
C1
(wire black) Sensor 1 in serie with
B
(wire black) Sensor 2
C
(wire blue) Feedback sensor
C1
(wire black) Power sensor
