Use and Maintenance Manual – Pressure-sensitive bumpers type GSBPS
9/35
5
Description of the product
Bumpers are made of a polyurethane material (foam) exhibiting appropriate elasticity and are coated with
protective fabric. Inserted inside the bumpers is a sensitive element (“sensor”) properly secured inside the
foam. The whole is closed by a frame that is glued to the foams and the aluminum plates. Inserted inside the
bumpers is a sensitive element (“sensor”) properly secured inside the foam. The whole is closed by a frame
that is glued to the foams and the aluminum plate.
The power supply cable is a 4-pole cable - 4*0,35mm
2
FROR 300/500
– standard length 3 m. (CS). Different
lengths can be supplied upon request (max. 10 m); indicate the length you require when ordering.
In the standard version, the pressure-sensitive bumper comes with a black fabric coating, front side with
yellow and black oblique stripes.
Standard shapes available:
500
200
250
150
300
100
200
100
200
100
Type GSBPS03
Type GSBPS02
Type GSBPS01
Sensitive zone
Sensitive zone
Sensitive zone
Sensitive element
(“sensor”)
Frame
Plate
Polyurethane material
coated with protective fabric
