62
7100 Series Installation/Operating Manual —
P/N 9000-0447:J 08/28/08
System Programming
INFO Menu Selection
5.7 INFO Menu Selection
The INFO Menu Selection displays the following information:
•
Firmware Version installed in the 7100 Series pane
•
The last configuration
•
The numerical designation of the menu item used for the last configuration update.
Figure 5.7.1 illustrates the Info Menu options. Table 5.7.1 lists the Info Menu tree and display
selections.
Figure 5.7.1 Info Menu
Menu Tree
Display and Selections
Main
Log
[VIEW] 1:Display Log 2: Print Log
[LOG ] 3:Clear Log 4:Sens. Report
1: Opens Show Events Menu.
2: Opens Print Log Menu.
3: Prompts for OK; if accepted, clears the Event Log and resets
panel.
4: Initiates a sensor sensitivity printout.
Main
Log
Show Events
(Display shows a log entry)
Scrolls through all logged events, beginning with the most recent
event. If user
attempts to scroll beyond the end (or beginning) of the log, End of
log is displayed
briefly, then the last (or first) event is redisplayed.
Display cannot give instructions, since it contains all the
information about the event being displayed (same as the display
you would see when the event occurred).
Main
Log
Print Log
[PRINT} 1: All events 2:Last 20
[LOG]
If there is no log printout in progress, starts a printout as shown
above. Once the printout begins, or if a printout is in progress when
this menu is opened, the message and function change to “3:Abort
printout”. Printout starts immediately, not when OK is pressed.
If printout completes while this menu is still open, the text of the
menu doesn’t change until the user presses a key.
Main
Log
[PANEL] Software Last Cfg. Change
[INFO ] V1.2-001 12:23 07/23/99 33
Shows the system software version, time and date of the most
recent change to the configuration program, and number of the
menu used to make the change (i.e., what was changed).
Table 5.7.1 Info Menu Tree Display and Selections
CONFIG. DATE
FIRMWARE VER.
INFO
PREV. MENU #
