25
7100 Series Installation/Operating Manual —
P/N 9000-0447:J 08/28/08
Installation
7100-NetSOLO Cabinet Installation
2.3.3 7100, BSM Plate to the Backbox Installation
1.
Install the Transformer on the 7100-NetSOLO backbox and secure with two (2), nuts (#10-32
KEPS) as shown in Location 1 of Figure 2.3.4.
2.
Mount the INI-7100 onto the 7100, BSM plate and secure with (4) screws (#6-32 x .25 sems)
as shown in Location 2 of Figure 2.3.4.
3.
Mount the 7100, BSM plate to the four-hole mounting pattern in the 7100-NetSOLO backbox
and secure with four (4), nuts (#10 KEPS) as shown in Locations 3 thru 6 of Figure 2.3.4.
4.
After the BSM is mounted in the backbox, install the door.
5.
When the BSM is replaced, the system must be re-programmed.
For additional information, refer to the
BSM Installation Instructions P/N 9000-0453
.
Figure 2.3.4 7100-NetSOLO, BSM Plate to the Backbox Installation
NOTE:
To install the door, the door must be opened at least 90° from the backbox.
NUT, HEX, #10, KEPS
TRANSFORM ER M OUNTING
(SCREW , #6-32 X .25 SEM S)
INI-7100 M OUNTING
INI-7100
(OPTIONAL)
7100-NETSOLO
BACKBOX
12 A
MP
/HO
UR
BA
TTE
RY
(2 P
LA
CE
S)
NUT, HEX, #10, KEPS
(4 PLACES)
7100 BSM M OUNTING
710
0 B
SM
PL
AT
E
INI-
710
0
BA
TTE
RY
BA
TTE
RY
3
4
3
4
6
6
5
5
TRANSFORMER
FC-7100
1
2
2
2
