7100 Series Installation/Operating Manual —
P/N 9000-0447:J 08/28/08
59
CLOCK Menu Selections
System Programming
5.5 CLOCK Menu Selections
Table 5.5.1 and Table 5.5.2 list the Clock menu selections and description. Figure 5.5.1 illustrates
the Clock Menu options.
Figure 5.5.1 Clock Menu
Menu Selections
Description
Time
Is set in 24 hour notation. It is set with hours then minutes
“HHMM”.
Date
Is set as month, date and year “MMDDYY”.
Night Hours
Sets the Day/Night programming. If no time is set here, the system will
always remain in the Day mode.
Night Start
Will initiate the Night/Weekend programming which is generally used
to make certain sensors more sensitive to particles of combustion
than during the day. This must be programmed in 24 hour notation
(HHMM).
Night End
Will conclude the Night/Weekend programming. Weekend Days is
where the user programs the days of the week that the premises are
unoccupied (the same as Night).
Holidays
Is where the user programs the days of the year that the premises are
unoccupied (the same as Night and Weekends). This must be pro-
grammed as month and date (MMDD).
Table 5.5.1 Clock Menu Selections
HOLIDAYS
WEEKEND DAYS
NIGHT HOURS
DATE
TIME
CLOCK
NIGHT END
NIGHT START
