48
7100 Series Installation/Operating Manual —
P/N 9000-0447:J 08/28/08
System Programming
MAIN Menu Selections
Main
Config
Inputs
Type
Edit
(If BKSP/EDIT is pressed, and
editing is possible).
[DEFINE] AMM Type 43 (Alarm)
[TYPE ] 1: select response
<>: scrolls through available response categories:
• Alarm • Tamper
• Manual Station • Waterflow
• Supervisory
Note that Alarm, Manual Station and Waterflow all pro-
duce alarm response, except Manual Station which may
use PAS (depending on the global PAS settings) and
Waterflow disables silencing.
OK: accepts the response selection and opens the Edit
Device Type Menu.
Main
Config
Inputs
Type
Define Type
(After response category is
accepted)
[EDIT ] Spark De (__ Alpha, repeat
[TYPE LBL] move, EDIT flip case, OK
Initially, label comes up all underscores.
Keypad: enters text via telephone codes. Scrolls through
the numeral’s associated lower case letters, plus the
numeral itself.
Example:
•
Press “2” key once for ‘a’, again for ‘b’, again for ‘c’,
and again for ‘2’. Press again to scroll back to ‘a’.
•
To change to/from upper case, press “BKSP/EDIT”,
or scrolls to the previous or next letter.
•
“BACK” exits to the Add Type menu without making
a change.
•
OK accepts new label and exits to the Select Input
Type Menu.
Main
Config
Inputs (or Outputs)
Select
Location
Edit
____________or___________
Main
Config
System ID
Edit
[EDIT 1ST] (____ Alpha key, repeat
[LOC WORD] move, EDIT flip case, OK
Keypad: enters text (See Edit Device Type Menu). OK:
accepts new text for selected address.
Various
(If OK is pressed when an
illegal value has been entered).
Error! Entry is not valid. Press BACK, then change
value or press BACK again.
Table 5.1.3 Main Menu Tree Display and Selections (Continued)
