Gamatronic MEGA V2 SA25 Page 37 User Manual Download

Page: 37 / 70

Gamatronic Electronic Industries Ltd.

User Guide: MEGA V2 SA25, Release 1.5

Table 4: Log messages

NTRY

XPLANATION

AC LINE FAULT

No input voltage to charger.

AC LINE OK

Input voltage to charger has been restored

BATT. TEST FAIL

The last battery test failed.

BATT. TEST.OK

The last battery test was successful (following a failed battery test).

END OF BACKUP

Battery has been completely discharged.

RECHARGING

Mains power has returned and battery is recharging.

INVERTER OFF

The inverter has been turned off.

INVERTER ON

The inverter has been turned on.

OVERLOAD

An overload condition exists.

LOAD IN RANGE

The load has returned to normal range.

LOAD ON BYPASS

The load is bypassing the inverter.

LOAD ON INVERTER

The load has returned to the inverter.

UPS OFF

The UPS was turned off.

UPS ON

The UPS was turned on.

Summary of Contents for MEGA V2 SA25







































































Search results

Summary of Contents for MEGA V2 SA25

Reviews:

Related manuals for MEGA V2 SA25

Brands by name

Popular brands

Gamatronic MEGA V2 SA25, User Manual

Search results

Summary of Contents for MEGA V2 SA25

Reviews:

Related manuals for MEGA V2 SA25

Brands by name

Popular brands