Gamatronic MEGA V2 SA25 Page 7 User Manual Download

Page: 7 / 70

Gamatronic Electronic Industries Ltd.

User Guide: MEGA V2 SA25, Release 1.5

vii

AFETY CONSIDERATIONS

The

MEGA V2 SA25

UPS system is designed for industrial applications and harsh

environments. Nevertheless the

Mega V2 SA25

UPS system is a sophisticated power system

and should be handled with appropriate care, following these guidelines.

Do’s

•

Read this manual carefully before starting installation and operation of the UPS.

•

Review the safety precautions described below to avoid injury to users or damaging

equipment.

•

All power connections must be completed by a licensed electrician who is experienced in

wiring this type of equipment, and who is knowledgeable about all federal, state, and local
electrical codes and regulations.

Improper wiring may cause damage to the equipment or

injury to personnel.

•

Pay attention to the warning signs, labels and marks on the unit. A warning sign signals the

presence of a possibly serious, life-threatening condition.

•

Keep the surroundings clean, uncluttered and free from excess moisture.

•

Allow only qualified technicians to service the UPS. There are no user-serviceable

components.

Do not try to repair it yourself!

•

Use the UPS only for its intended purpose.

The battery drawer contains a series of 12-Volt batteries that provide high voltage
and energy in the UPS body even when the UPS is not connected to the ac input.
Appropriate precautions should be taken during installation, inspection and
servicing.

WARNING - RISK OF LETHAL ELECTRIC SHOCK:

Don’ts

•

Do not open the cover of the UPS or the battery cabinets under any circumstances. All UPS

panels and doors should be closed.

•

Do not insert any objects through the ventilation holes.

•

Do not put objects on the UPS.

•

Do not move the UPS while it is operating.

•

Do not use the UPS outdoors.

•

Do not turn the UPS upside down during transportation.

•

Do not connect or disconnect the cable to the battery cabinet before the battery circuit breaker

is turned OFF.

•

Do not turn ON the battery circuit breaker when the battery cabinet is disconnected from the

UPS.

•

Do not install next to any gas or electrical heaters. A restricted location is recommended in

order to prevent access by unauthorized personnel.

Summary of Contents for MEGA V2 SA25







































































Search results

Summary of Contents for MEGA V2 SA25

Reviews:

Related manuals for MEGA V2 SA25

Brands by name

Popular brands

Gamatronic MEGA V2 SA25, User Manual

Search results

Summary of Contents for MEGA V2 SA25

Reviews:

Related manuals for MEGA V2 SA25

Brands by name

Popular brands