Galvanic Applied Sciences 943-TGX, Operation Manual

Page: 44 / 110

Revision 4 44 August 02, 2019
4.8.3 Display
The Display sub-panel (Figure 4-11) is used to set the X and Y range for the display on the
Analysis 1 and Analysis 2 panels.
Figure 4-11: Display Sub-Panel
To edit a parameter, use the
Field Prev
or
Field Next
button to access the field, enter the
desired value for the parameter via the keypad and press Enter .
The X range is from 1-15 min and the Y range is from 0.1 to 1000.
The
LCD Backlight
field is used to adjust the backlighting of the display to allow the user to
adjust for ambient lighting. The slide bar or the buttons can be used to set the desired
amount of backlighting.
When all desired changes have been made, select
Save
. Selecting
Revert
will keep the
parameter values that were used before the start of the editing process.