Galvanic Applied Sciences 943-TGX, Operation Manual

Page: 15 / 110

Revision 4 15 August 02, 2019
1.5 System Operating Control
The analyzer system operation is controlled by a dedicated data acquisition system which
provides supervisory control, performs all calculations and provides the user interface.
The system includes an onboard computer system which provides a graphic display of key
system control parameters and their status, a digital display of the instantaneous value of the
Air Demand, H
2
S, SO
2
, and COS, and historical graphic displays of the Air Demand, H
2
S and
SO
2
. The display monitor is mounted on the door of the control cabinet. Cabinet access is not
required for viewing or operation.
The Air Demand, H
2
S, SO
2
, and AO4 outputs can be configured as loop-powered 4 – 20 mA
signals and the system status can be provided via relay contacts. As an option, the AO4
output can be configured to output Air Demand, H
2
S, SO
2
, COS, Sigma S (the sum of the
H
2
S and SO
2
concentrations), or H
2
S/SO
2
ratio. An RS485 serial port is also provided which
can be used for available for Modbus communication.
A hand held key pad is provided for user interface with the analyzer. Operation of the system
with the keypad is described in Section 4.2. As an alternative, a web based graphical user
interface (GUI) can be used to view and enter information on a remote basis (Section 4.3).
1.6 Contents of this Manual
This manual contains the following information:
• Section 1
: Model 943-TGX Tail Gas Analyzer Spectrophotometer Overview
presents
introductory information about spectrophotometry and the system.
•
Section 2:
Installation describes unpacking the analyzer, installing it in the facility and
interfacing with other devices.
•
Section 3:
Operation of the System
explains how the operator interacts with the analyzer.
•
Section 4:
Control of the System
describes how the user enters data and views system
parameters.
• Section 5 : Operating the Spectrophotometer via the Controller Module describes the role of
the keypad controller.
•
Section 6 :
The Graphical User Interface
presents a detailed discussion of the various
aspects of the application program on the personal computer.
• Section 7: Operating the System discusses routine operation of the analyzer.
•
Section 8:
Maintenance and Troubleshooting
includes a discussion of required
maintenance activities and presents information that is useful in diagnosing problems with
the analyzer .
• Section 9:
Wiring Book
includes information about interfacing auxiliary components such
as relays, solenoids, etc. to the controller module.
•
Section 10:
Spare Parts
lists a number of items which may be required to maintain
operation of the analyzer.
• Section 11: Specifications presents the specifications for the analyzer.