Galil Motion Control DMC-40x0 Series Command Reference Manual Download Page 218

Page: 218 / 280

208

●

DMC-40x0 Command Reference

FUNCTION:

Reference Position

DESCRIPTION:

This command returns the commanded reference position of the motor(s).

ARGUMENTS:

RP nnnnnnnnnn

where

n is A,B,C,D,E,F,G,H,M or N, or any combination to specify the axis or axes`

USAGE: DEFAULTS:

While Moving

Yes

Default Value

In a Program

Yes

Default Format

Position Format

Command Line

Yes

Controller Usage

ALL CONTROLLERS

OPERAND USAGE:

_RPn contains the commanded reference position for the specified axis.

RELATED COMMAND:

Tell Position

Note:

The relationship between RP, TP and TE: TEA equals the difference between the reference

position, RPA, and the actual position, TPA.

EXAMPLES:

Assume that ABC and D axes are commanded to be at the positions 200, -10, 0, -110

respectively. The returned units are in quadrature counts.

PF 7

Position format of 7

LZ0

Turn leading zeroes on

0000200,-0000010,0000000,-0000110

Return A,B,C,D reference positions

RPA

0000200

Return the A motor reference position

RPB

-0000010

Return the B motor reference position

PF-6.0

Change to hex format

$0000C8,$FFFFF6,$000000,$FFFF93

Return A,B,C,D in hex

Position =_RPA

Assign the variable, Position, the value
of RPA

Hint: RP command is useful when operating step motors since it provides the commanded
position in steps when operating in stepper mode.

Summary of Contents for DMC-40x0 Series

























































































































































































































































































Search results

Summary of Contents for DMC-40x0 Series

Reviews:

Related manuals for DMC-40x0 Series

Brands by name

Popular brands

Galil Motion Control DMC-40x0 Series, Command Reference Manual

Search results

Summary of Contents for DMC-40x0 Series

Reviews:

Related manuals for DMC-40x0 Series

Brands by name

Popular brands