manualshive.com logo in svg

Galil Motion Control DMC-40x0 Series, Command Reference Manual

Share
Download
Galil Motion Control DMC-40x0 Series Command Reference Manual Download Page 219

DMC-40x0 Command Reference 

RS  • 209 

RS   

 

 

 

 

 

 

FUNCTION:

  Reset 

DESCRIPTION:

 

The RS command resets the state of the processor to its power-on condition.  The previously saved 

state of the controller, along with parameter values, and saved sequences are restored. 

RS-1    Soft master reset.  Restores factory defaults without changing EEPROM.  To restore 

EEPROM settings use RS with no arguments. 

USAGE:    DEFAULTS: 

While Moving 

Yes 

Default Value 

0 

In a Program 

No 

Default Format 

3.0 

Command Line 

Yes 

 

 

Controller Usage 

ALL CONTROLLERS

 

OPERAND USAGE:

  

_RS returns the state of the processor on its last power-up condition.  The value returned is the 

decimal equivalent of the 4 bit binary value shown below. 

 

Bit 3 

For master reset error (there should be no program to execute) 

Bit 2 

For program check sum error 

Bit 1 

For parameter check sum error 

Bit 0 

For variable check sum error 

 

Summary of Contents for DMC-40x0 Series

























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands