Galil Motion Control DMC-40x0 Series Command Reference Manual Download Page 269

Page: 269 / 280

DMC-40x0 Command Reference

XQ • 259

FUNCTION:

Execute Program

DESCRIPTION:

The XQ command begins execution of a program residing in the program memory of the

controller. Execution will start at the label or line number specified. Up to 8 programs may be
executed with the controller.

ARGUMENTS:

XQ #A,n XQm,n

where

A is a program name of up to seven characters.

m is a line number

n is an integer representing the thread number for multitasking

n is an integer in the range of 0 to 7.

NOTE: The arguments for the command, XQ, are optional. If no arguments are given, the first

program in memory will be executed as thread 0.

USAGE: DEFAULTS:

While Moving

Yes

Default Value of n:

In a Program

Yes

Default Format

Command Line

Yes

Controller Usage

ALL CONTROLLERS

OPERAND USAGE:

_XQn contains the current line number of execution for thread n, and -1 if thread n is not running.

RELATED COMMANDS:

Halt execution

EXAMPLES:

XQ #APPLE,0

Start execution at label APPLE, thread zero

XQ #DATA,2

Start execution at label DATA, thread two

XQ 0

Start execution at line 0

Hint: For DOS users, don't forget to quit the edit mode first before executing a program!

Summary of Contents for DMC-40x0 Series

























































































































































































































































































Search results

Summary of Contents for DMC-40x0 Series

Reviews:

Related manuals for DMC-40x0 Series

Brands by name

Popular brands

Galil Motion Control DMC-40x0 Series, Command Reference Manual

Search results

Summary of Contents for DMC-40x0 Series

Reviews:

Related manuals for DMC-40x0 Series

Brands by name

Popular brands