Galeo PC78MR-6, Operation & Maintenance Manual

Page: 116 / 295

.
OPERATION
MACHINE OPERATIONS AND CONTROLS
Check Oil Level in Hydraulic Tank, Add Oil
WARNING
The parts and oil are at high temperature immediately after the engine is stopped, and may cause burns. Wait for the
temperature to go down before starting the work.
When removing the oil filler cap, turn it slowly to release the internal pressure, then remove it.
1. When checking the oil level in the hydraulic tank, set the machine in the following condition A or B.
1) When checking in condition A in the diagram on the right,
start the engine, run the engine at low speed, lower the
blade to the ground, pull in the arm and bucket cylinders,
and swing the boom to the central position. Then lower the
boom, set the bucket teeth in contact with the ground, and
stop the engine.
2) When checking in condition B in the diagram on the right,
start the engine, run the engine at low speed, lower the
blade to the ground, push out the arm and bucket
cylinders, and swing the boom to the central position. Then
raise the boom to the maximum height and stop the
engine.
3 - 61