Page.80.
resolution up to 1080p. Also can output the live image of analog camera, IP camera, SDI digital
camera to HD TV monitors.
3.6 PoE power output
The tester supports PoE (Power over Ethernet) output to IP camera via RJ45 cable from LAN port. Data
transmission and DC 48V power supply are using the same cable‘s PIN 1, 2, 3, 6 to deliver. The IP
camera with PoE support, can directly connect to tester without external power adapter.
Notice
a. Please make sure the cable connected to the tester‘s Lan port is straight-line cable and has no short
circuit, otherwise will damage the tester
b. Before using PoE power output, pls check the IP camera whether supports POE powered. Otherwise
it will damage the IP camera.
c.The instrument‘s PoE maximum power output is 24W. If Ultra- high-power load happens, the tester
will enter protection mode .
3.7 DC12V 2A power output
When the tester is turned on, DC12V power output default ―ON‖ status. Do not need to click the switch,
to choose ―ON‖ or ―OFF‖.
The top and the bottom of the ―DC12V/2A OUT ‖is power output interface
，
it must use tester‘s power
convert cable ,the smaller end of the convert cable connect to DC12V/2A OUTPUT, the other end
Summary of Contents for SED-MON-IT-860
Page 1: ...IP camera tester USER MANUAL V01 00 ...
Page 17: ...Page 12 2 5 Function ...
