Page.68.
2. Don‘t output this DC12V/2A power to the DC12V/IN port of the IP camera tester to avoid destroy
3. The IPC tester power output is close to 2A, if the IP camera‘s power is over 2V, the tester will auto
enter protection mode. Disconnect all the connections of the tester and then connect the tester with
power adaptor to resume the tester.
4. Before turn on the PoE power output, please make sure the IP camera supports PoE powered.
Otherwise may damage IP camera.
5. When PoE power output, UTP cable must be Straight-through, and cannot be short circuit,
otherwise it will damage the tester .
6. Make sure the tester is full charged or more than 80% charged, otherwise the tester will shows
―low power ‖ , ―not able to supply power‖ .
3.3.24 Application tools
It contains Audio record, Network Bandwidth test ,DHCP, Notepad, Link Monitor, etc. Other
application tools can be customized according to customer‘s requirements.
Click icon to enter
Audio Record
：
Recording and play the received audio. Connect the audio devices to tester‘s Audio
input port
，
click icon to enter and record ,click the red button to stop, and prompt to save the
recording.
Summary of Contents for SED-MON-IT-860
Page 1: ...IP camera tester USER MANUAL V01 00 ...
Page 17: ...Page 12 2 5 Function ...
