Page.2.
◆
Never connect the meter with any voltage source while the function switch is in the current,
resistance, capacitance, diode, continuity, otherwise it will damage the meter.
◆
Never perform capacitance measurements unless the capacitor to be measured has been discharged
fully.
◆
Never measure any of resistance, capacitance, diode or continuity measurements on live circuits.
Visual laser sources
When you turn on visual laser sources, please don‘t stare at it, or will damage to eyes
When not using it
，
Please turn it off and cover the protective cap .
2. IP Camera Tester Introduction
2.1 General
The 7 inch touch screen IP camera tester is designed for maintenance and installation of both IP camera
and analog camera as well as other security equipments . 800x600 resolution, enable it to display
network HD camera and analog camera image in top quality. Support both ONVIF PTZ and analog
PTZ control. The combination of touch screen and key buttons make the IP camera tester very user-
friendly.
Meanwhile the tester is also a very great tool for Ethernet network, cabling system and fiber optic
communication etc. It can test PoE power voltage, PING, IP address searching etc. It can diagnose the
location of the BNC and network cable‘s short circuit and open circuit. By sending the audio signal, use
the blue cable tracer tester to find the connected cable from messy cables. Test LAN cable or telephone
cable‘s type and the sequence of wires. Optical power meter and visual fault detector function, effective
to solve the fiber optical transmission problem. Other functions include 24W PoE power supply, digital
multimeter, LED Lamp, DC 12V 2A power output etc. Its portability, user-friendly design and
multi-functions make the IP camera tester become an essential tool for the installers or technicians,
greatly improving the working efficiency and simplifying the installing and maintenance.
Summary of Contents for SED-MON-IT-860
Page 1: ...IP camera tester USER MANUAL V01 00 ...
Page 17: ...Page 12 2 5 Function ...
