Galaxy SED-MON-IT-860 User Manual Download Page 86

Page: 86 / 92

Page.81.

connect to camera power input interface.

Application

Power output function is mainly used in the camera field demonstration and testing, meanwhile, for

some camera installation sites, if there is no power outlet, the tester can offer temporary power for the

camera.

Notice:

Don‘t input any power into the ―DC12/2A OUTPUT‖ port of the tester to avoid destroy.

Man-made damage is not within our company‘s warranty

Don‘t output this DC12V/2A power to DC12V/ IN port to avoid destroy. otherwise the tester will

damage, and man-made damage is not within our company‘s warranty.

The IPC tester power output is close to 2A, if the IP camera‘s power is over 2V, the tester will

auto enter protection mode. Disconnect all the connections of the tester and then connect the

tester with power adaptor to resume the tester.

Summary of Contents for SED-MON-IT-860





























































































Search results

Summary of Contents for SED-MON-IT-860

Reviews:

Related manuals for SED-MON-IT-860

Brands by name

Popular brands

Galaxy SED-MON-IT-860, User Manual

Search results

Summary of Contents for SED-MON-IT-860

Reviews:

Related manuals for SED-MON-IT-860

Brands by name

Popular brands