Page.61.
While in flashlight interface, click the red button, to turn on the LED lamp. Press again to turn off. If
not turn off the light but click icon to quit, the LED lamp is still on.
Lighting model or Time setting can be selected.
3.3.18 PoE Voltage test
Click icon to enter PoE voltage measurement
Connect the cable to the power supply equipment‘s POE port and the tester‘s PSE IN port. Connect IP
camera or wireless AP equipment to tester‘s LAN port, the POE voltage and the cable‘s pin connection
status show on the screen.
Note : The PoE power supply equipment( POE Switch, PSE power supply equipment) must be
connected to the PSE IN port, the powered device such as IP camera or wireless AP must be connected
to the LAN port, then it measure the voltage correctly.
Please do not connect PoE power supply equipments (such as PSE, PoE switch. ) to the tester‘s
UTP/SCAN port; otherwise it will damage the tester.
3.3.19 TDR cable test
（
optional
）
Note
：
The testing cable can’t be connected to any equipment, otherwise it will damage the
tester!
Summary of Contents for SED-MON-IT-860
Page 1: ...IP camera tester USER MANUAL V01 00 ...
Page 17: ...Page 12 2 5 Function ...
