Page.16.
Notice: When the Charge Indicator
turns off, the battery is approximately 90%
charged. The charging time can be extended for about 1 hour and the charging time within 12
hours will not damage the battery.
Notice
：
Press the key several seconds to restore the default settings when the
instrument works abnormally.
Multi-meter: the red and black multi-meter pen must insert the
corresponding port.
Warnings
：
Instrument communication port is not permitted access circuit voltage over 6V,
otherwise damage the tester.
Warnings
：
Not allow insert multi-meter pen in the current
terminal to measure voltag
3.2 Instrument connection
3.2.1 IP camera connection
Power the IP camera by outter power source, then connect the IP camera to the IPC tester‘s LAN port,
if the link indicator of the tester‘s LAN port is green and the data indicator flickers, it means the IP
camera and the IPC tester are well connected. If the two indicators don‘t work, it needs to check if the
IP camera is powered on or the network cable is ok.
Summary of Contents for SED-MON-IT-860
Page 1: ...IP camera tester USER MANUAL V01 00 ...
Page 17: ...Page 12 2 5 Function ...
