Page.47.
Application
：
The tester will send special signals to make the connected LAN port flicker at special frequency, which
will enable the installers to easily and quickly find the connected Ethernet cable. This function can
prevent mistakenly insertion or disconnection non-corresponding cable to artificially interrupt network
connection.
3.3.11 Data monitor
Pls click icon to enter
Click ―Setting‖ to choose the baud rate of RS485/RS232; it must be the same as the DVR or the Control
keyboard
.
The DVR or Control keyboard send the code to the tester, if it can be read, the protocol will
shown on the upper right, like Pelco D, if not, like P:---
While the tester receives the code, press the key to empty.
Though the RS485 port, display the PTZ control code of the multifunctional keyboard or the DVR.
Controller can check the status of the RS485 transmission through the code on the display. (The RS485
communication rate must be the same.)
Application
：
Check the RS485 communication states of the video optical transmitter whether normal.
Engineer can analyze the protocol and check the data through the displayed code.
3.3.12 Optical power meter
（
Optional
）
Click icon to enter ,with five wavelength 1625nm
、
1550nm
、
1490nm
、
1310nm
、
1300nm
、
850nm ,linear or nonlinear optical power display, both for optical power testing and Fiber
link loss relative measurement . It is necessary tool for installation and maintenance optical fiber
Summary of Contents for SED-MON-IT-860
Page 1: ...IP camera tester USER MANUAL V01 00 ...
Page 17: ...Page 12 2 5 Function ...
