Galaxy SED-MON-IT-860 User Manual Download Page 72

Page: 72 / 92

Page.67.

3.3.23 PoE power / DC12V 2A and DC 5V 2A USB power output

When the tester is turned on, DC12V output power function Auto-turn on.

5V USB power output,adopts ultra-low power consumption design, when the tester is turned off , also

can be used as a power bank ,to supply power for the external USB device

To turn on and turn off PoE power output must by click the switch , to choose ―on‖ or ―off‖.

Click icon to enter and turn on PoE power supply out interface. The tester detects the connected

IP camera whether support PoE power via Lan port . If the IP camera supports PoE function, the PoE

power is delivered to IP camera via the tester‘s 1236 pins in the Lan port. The top menu bar display

icon

“

48V ON

”

, the icon can be moved.

Note:

1. Don‘t input any power into the ―DC12/2A OUTPUT‖ port of the tester to avoid destroy.

Summary of Contents for SED-MON-IT-860





























































































Search results

Summary of Contents for SED-MON-IT-860

Reviews:

Related manuals for SED-MON-IT-860

Brands by name

Popular brands

Galaxy SED-MON-IT-860, User Manual

Search results

Summary of Contents for SED-MON-IT-860

Reviews:

Related manuals for SED-MON-IT-860

Brands by name

Popular brands