Commander 1114 VoIP
5
4
Installation
Please read all these instructions thoroughly before starting installation.
THESE UNITS MUST BE CONFIGURED
BEFORE THEY ARE INSTALLED.
All GAI-Tronics VoIP telephones have identical settings as factory
defaults, so each one must be individually configured to give it a
unique identity on the network. This may be difficult to do after the
units are installed.
4.1 Sequence of Events
In order to ensure the installation is as trouble free as possible, please follow
the recommended sequence of events described in detail in the sections
below. In summary this sequence is:
•
Pre installation – preparations to make before installation, including
initial configuration.
•
Mounting – physically fixing the unit in pace
•
Connection – attach cables
•
Testing – ensure it functions as expected
•
Put into service – finalise the installation
4.2 Pre-installation
Please ensure that each unit is configured prior to installation, and that the
requirements listed below are taken into consideration before installation
begins:
4.2.1
Initial Configuration
As factory default, each Commander 1114 has the following
settings:
•
Static IP address
192.168.1.2
•
Log in user name:
user
•
Log in password:
password
As an absolute minimum, you will need to either assign a unique
static IP address to each unit or set it to DHCP.
IMPORTANT: After changing the IP address of the telephone
you will need to browse to the new IP address to access the
configuration, instead of the default 192.168.1.2.
IMPORTANT: If DHCP is enabled, ensure that there is a suitable
DHCP server available on the network and that you have a
Summary of Contents for 1114
Page 18: ...Commander 1114 VoIP 17...
Page 31: ...Commander 1114 VoIP 30...