GAI-Tronics 1114 Installation And User Manual Download Page 5

Page: 5 / 32

Commander 1114 VoIP

Features

This manual describes the Commander 1114 voice over internet
protocol (VoIP) telephone. Commander 1114 is a rugged telephone
built to withstand arduous use and environmental extremes. Features
include:

•

Glass filled polyester body - rugged and corrosion free.

•

Weather resistant up to IP66

•

Rugged handset with curly cord or armoured stainless steel cord.

•

Hearing aid compatible inductive coupling as standard

•

Headset option available.

•

Integral 90dBA ringer with volume adjustment.

•

Programmable, volt-free contact output

•

Available in various button configurations including zero button
(hotdial) versions

•

One touch dial memories (1, 3, 6 and 18 button versions only)

•

SIP compatible (RFC3261)

•

Automatic outgoing call diversion (memory list)

•

Real-time alarm reporting via email or Syslog

•

Power over Ethernet 802.3af compatible (spare pair only)

•

Configurable via web page or download

Summary of Contents for 1114

































Search results

Summary of Contents for 1114

Reviews:

Related manuals for 1114

Brands by name

Popular brands

GAI-Tronics 1114, Installation And User Manual

Search results

Summary of Contents for 1114

Reviews:

Related manuals for 1114

Brands by name

Popular brands