Commander 1114 VoIP
18
4.7 Option Settings, Configuration and Programming
Commander 1114 has no internal switches or jumpers. No option
settings are made on the telephone itself. All option settings,
configuration and programming is done remotely via the unit's web
pages or by using a configuration file. Please refer to the separate
configuration guide for full details, available from:
www.gai-tronics.org/support/voip-support
/
Please note: the configuration guide covers all models of GAI-Tronics
VoIP telephone. Specifically the Commander 1114 does not include the
following features:
•
External inputs
•
LEDs
•
Serial port
•
Only a single relay (OUTPUT1) is fitted.
4.8 Assembly of Telephone on to Installed Base
1. Ensure that the keypad connection between the base and the keypad
PCB is made observing the correct orientation of the connector. A
keyway on the connector facilitates ensuring that the ribbon cable
connector is correctly orientated. Do not forcibly fit the connectors
IMPORTANT – FAILURE TO ENSURE THE CORRECT
ORIENTATION OF THE CONNECTOR COULD CAUSE DAMAGE
TO THE TELEPHONE
Summary of Contents for 1114
Page 18: ...Commander 1114 VoIP 17...
Page 31: ...Commander 1114 VoIP 30...
