29
What to do in the event of a fault
en
3
What to do in the event of a fault
What to do in the event of a fault
Malfunctions often have simple explanations. Please
read the following notes before calling the after-sales
service.
m
Warning – Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by one
of our trained after-sales technicians. If the appliance is
defective, unplug the appliance from the mains or switch
off the circuit breaker in the fuse box. Contact the after-
sales service.
Power cut
Your appliance can bridge a power cut of a few
seconds. Operation continues.
If the power cut was for a longer period and the
appliance was in operation, a message appears in the
display. Operation is interrupted.
Set the function selector to
0
, then the appliance can be
operated again as usual.
Demo mode
The
°
symbol appears on the display when the
appliance is in demo mode. The appliance will not heat
up.
Briefly disconnect the appliance from the mains (switch
off the household fuse or the circuit breaker in the fuse
box). Then deactivate demo mode in the basic settings
within 3 minutes.
Replacing the oven light bulb
It is possible to replace the oven light. Heat-resistant
halogen bulbs (60 W/230 V/G9) can be obtained from
the after-sales service or from a specialist retailer. Only
use halogen bulbs of the same type.
m
Warning – Risk of electric shock!
When replacing the cooking compartment bulb, the
bulb socket contacts are live. Before replacing the bulb,
unplug the appliance from the mains or switch off the
circuit breaker in the fuse box.
m
Warning – Risk of burns!
Bulbs become very hot when switched on. There is still
a risk of burning for some time after they have been
switched off. Allow the bulbs to cool down before
replacing them.
Note:
Always remove the new halogen bulb from the
packaging using a dry cloth. This increases the service
life of the bulb.
Proceed as follows
1
Loosen the screw on the lamp cover. Tilt down the
lamp cover.
Disruption
Possible cause
Solution
Appliance not working, no display
Plug not inserted
Connect the appliance to the electricity
mains
Power failure
Check whether other kitchen appliances
are working
Fuse defective
Check in the fuse box whether the fuse for
the appliance is in working order
Operating error
Switch off the fuse for the appliance in the
fuse box and switch it on again after about
60 seconds
Appliance cannot be started
Appliance door is not quite closed
Close appliance door
The appliance is not working and the
display does not respond.
0
appears in
the display
Childproof lock activated
Deactivating the childproof lock
Appliance switches off on its own
Safety shut-off: the appliance has not
been operated for longer than 12 hours
Confirm the message with
™
, switch off the
appliance and set it again.
Appliance does not heat up,
°
appears
in the display
Appliance is in demo mode
Deactivate the demo mode in the basic set-
tings
Error message "Exxx"
If an error message is displayed, turn the
function selector to
0
; if the display goes
out, there was a non-recurring problem. If
the error occurs repeatedly or the display
remains on, please contact the after-sales
service and inform them of the error code.
