13
Operating the appliance
en
2
Confirm with
™
.
Setting the date
The preset date appears in the display. The day setting
is already active.
1
Set the day using the rotary selector.
2
Touch the
C
symbol to switch to the month setting.
3
Set the month using the rotary selector.
4
Touch the
C
symbol to switch to the year setting.
5
Set the year using the rotary selector.
6
Confirm with
™
.
Setting the temperature unit
The two possible units °C and °F will appear on the
display. The default unit is °C.
1
Use the rotary selector to select the unit you
require.
2
Confirm with
™
.
Ending initial set-up
"Initial set-up complete" will appear on the display.
Confirm with
™
.
The appliance will switch to standby mode and the
standby display will appear. The appliance is now ready
to use.
Heating up the oven
Make sure that there is no leftover packaging in the
cooking compartment.
To eliminate the new-appliance smell, heat up the oven
with it empty and the door closed. One hour with hot
air
H
at 200 °C is ideal for this.
Cleaning accessories
Before using the accessories for the first time, clean
them thoroughly using hot detergent solution and a soft
cloth.
1
Operating the appliance
Operating the appliance
Cooking compartment
m
Warning – Risk of scalding!!
The inside of the appliance door becomes very hot
during operation. Always open the appliance door as far
as it will go. Ensure that the appliance door does not
swing back. Avoid contact with the inside of the
appliance door.
The cooking compartment has four shelf positions. The
shelf positions are counted from the bottom up.
Caution!
–
Do not place anything on the cooking compartment
floor. Do not cover it with aluminium foil. A build-up
of heat could damage the appliance.
–
Do not slide any accessories between the shelf
positions, or they may tip.
Inserting accessories
The accessories have a locking function.The locking
function prevents the accessories from tilting when they
are pulled out.The accessories must be inserted into the
cooking compartment correctly for the tilt protection to
work properly.
When inserting the wire rack, make sure that
▯
the lug
¨
is pointing downwards
▯
the safety bar
©
on the wire rack is at the back and
on top.
