10
en
Familiarising yourself with your appliance
Notes
–
Different things can be displayed in standby mode.
The default setting is the GAGGENAU logo and the
time.
–
The brightness of the display depends on the
vertical viewing angle.
–
You can change the display and the brightness at
any time in the basic settings.
Activating the appliance
To exit standby mode, you can either
▯
Turn the function selector,
▯
Touch a control panel,
▯
Open or close the door.
You can now set the desired function. You can read
about how to set functions in the respective chapters.
Notes
–
When "Standby screen = off" is selected in the
basic settings, you must turn the function selector
to exit standby mode.
–
The appliance returns to the standby screen if you
have not made any settings for a long time after
activation.
–
When the door is open, the interior lighting
switches off after a short time.
Additional information
(
and
)
By touching the
(
symbol, you can call up additional
information. For example, information on the type of
heating set or on the current temperature of the cooking
compartment.
Note:
During continuous operation after heating up,
slight deviations in temperature are normal.
The
)
symbol appears for important information and
indicates that an action is required. Important
information on safety and operating status is also
occasionally displayed automatically. These messages
disappear automatically after a few seconds or must be
confirmed with
™
.
With Home Connect messages, the Home Connect
status additionally appears in the
)
. You will find more
information about this in the section entitled
.
Cooling fan
Your appliance has a cooling fan. The cooling fan
switches on during operation. Depending on the
appliance version, the hot air escapes above or under
the door.
After removing cooked food, keep the door closed until
the appliance cools down. The appliance door must not
be left ajar, as adjoining kitchen furniture may be
damaged. The cooling fan continues to run for a certain
time after operation and then switches off automatically.
Caution!
Do not cover the ventilation slots. Otherwise, the
appliance will overheat.
Function selector positions
Position
Function/type of heating
Temperature
Application
0
"Off" position
ž
Light
2
H
Hot air
50–300 °C
Default temperature 170 °C
Hot air: For cakes, biscuits and bakes on more than
one level.
The fan in the back wall of the oven distributes the
heat evenly throughout the cooking compartment.
*
Type of heating used to determine the energy efficiency class in accordance with EN 60350-1.
