21
Home Connect
en
3
Select the Home Connect app and install it on your
mobile device.
4
Launch the app and set up Home Connect access.
The app will guide you through the registration
process.
Connecting the appliance to your home network
(LAN)
The appliance must be connected to your home network
using a LAN cable.
The network connection will be established
automatically when the appliance is connected to the
mains electricity supply for the first time and put into
operation.
Connecting the appliance to your home network
(WLAN with WPS)
Requirements:
▯
Your router must have a WPS button. You will find
information about this in the manual for your router.
▯
You need to be able to access your router.
1
In the basic settings, select
¯
"Home Connect".
2
Touch the
%
symbol.
3
Turn the rotary selector to "WLAN".
4
Touch the
™
symbol to confirm.
A message about the WPS function will appear.
5
Touch the
™
symbol to continue.
6
Turn the rotary selector to "Automatic (WPS)".
7
Touch the
™
symbol to start the connection
process.
8
Press the WPS button on the router within the next
2 minutes.
If the display shows "Network connection successful",
the connection process is complete. Follow the
instructions in the app.
Connecting the appliance to your home network
(WLAN without WPS)
1
In the basic settings, select
¯
"Home Connect".
2
Touch the
%
symbol.
3
Turn the rotary selector to "WLAN".
4
Touch the
™
symbol to confirm.
A message about the WPS function will appear.
5
Touch the
™
symbol to continue.
6
Turn the rotary selector to "Manual".
7
Touch the
™
symbol to start the connection
process.
The appliance will set up its own "Home Connect"
WLAN network to which the tablet or smartphone
must be connected.
8
Follow the instructions in the app.
If the display shows "Network connection successful",
the connection process is complete. Follow the
instructions in the app.
Connecting the appliance to the app
Connect your appliance to the app when setting up
Home Connect or connect your appliance to an
additional Home Connect account. The Home Connect
app can be installed on any number of mobile devices,
which can then be connected to the appliance.
Requirements:
▯
The appliance is connected to the home network.
▯
The Home Connect app has been installed on the
mobile device.
1
To connect an additional account, select "Home
Connect" in the basic settings.
2
Use the rotary selector to select "Connect to app".
3
Touch the
%
symbol and start the connection
process with
™
.
4
Follow the instructions in the app.
If the display shows "Connection to app successful", the
connection process is complete.
Remote Start
Remote start must be activated in order to start and
operate your appliance via the Home Connect app. If
remote start is deactivated, the Home Connect app will
only show the operating modes of the appliance and let
you configure the settings.
Remote start is automatically deactivated in the
following situations:
▯
The appliance door is opened at least 15 minutes
after remote start has been activated.
▯
The appliance door is opened at least 15 minutes
after operation has ended.
▯
24 hours after remote start has been activated.
When you start a type of heating using the controls on
the appliance, remote start is activated automatically.
You can now make changes or start a new programme
from your mobile device.
Activating remote start
1
Set the function selector to
ž
2
Touch the
×
symbol.
The symbol
×
appears next to the
(
symbol.
Remote start is activated. You can now start a heating
mode via the app on the mobile device and send the
desired settings to the appliance.
Touch the
í
symbol to deactivate remote start.
