134
CompuScope 1610C
CompuScope 1610C specifications
PLEASE CHECK THE GAGE WEBSITE FOR THE MOST UP-TO-DATE SPECIFICATIONS.
SYSTEM REQUIREMENT
CompactPCI PICMG compliant system with the required number of free 6U slots; controller or PC with 128 MB
RAM, 50 MB hard disk and SVGA video.
The CompuScope 1610C must be installed in a slot that supports bus mastering to achieve stated performance.
SIZE
6U CompactPCI
1M Memory Model:
Occupies 1 slot
8M Memory Model:
Occupies 2 slots
128M Memory Model:
Occupies 2 slots
1G Memory Model:
Occupies 2 slots
POWER (IN WATTS)
+ 5 Volts
Worst
Case
Typical
All Memory Models
25 Watts
17.5 Watts
CHANNELS 1 & 2
Inputs per card:
2 differential inputs
Impedance: 1
M
Ω
, 35 pF or 50
Ω
, software selectable
Coupling:
AC or DC
Resolution: 16
bits
A/D Type:
Monolithic, 16 bit over sampling with decimation filter
Analog Bandwidth:
DC to 4 MHz (DC coupled)
10 Hz to 4 MHz (AC coupled)
DSP FIR filter limits the signal bandwidth to Nyquist Frequency
Single-Ended
Input Voltage Ranges:
±500 mV, ±1 V, ±2 V, ±5 V, ±10 V
DC Accuracy:
0.5% of full scale
Common Mode
Input Voltage:
±7.5 Volts (DC + peak AC), maximum
Common Mode
Rejection Ratio:
80 dB at 60 Hz
Absolute Maximum Amplitude:
1
M
Ω
Impedance:
±15 Volts (continuous)
50
Ω
Impedance:
±5 Volts (continuous),
±15 Volts (for 1 ms duration)
Internal Sampling Rate
MS/s:
10, 5, 2.5, 1
kS/s:
500, 200, 100, 50, 20, 10, 5, 2, 1
Protection: Diode
Clamped
Connector:
2 BNCs per channel
Summary of Contents for CompuScope 85GC
