8
Installing single or multiple/independent CompuScope CompactPCI/PXI cards
8
Turn on the power switch of the CompactPCI chassis.
9
Install software drivers.
Refer to the section within this manual called
for instructions on installing
Windows drivers for the CompuScope cards. Windows drivers are supplied with the product on CD.
10
Verify presence of the CompuScope card using the configuration utility provided with the drivers.
Refer to the section within this manual called
11
(Optional) Verify the operation of the card using or CSTest.
and CSTest are sample programs provided with the CompuScope drivers to ensure proper
operation of the CompuScope cards. is provided with the 3.82.xx drivers and CSTest is
provided with the 3.60.xx drivers. Please refer to the section within this manual called
Verifying signal acquisition with
for details on running .
12
Install GageScope software for CS85GC, CS82GC, CS14100C and CS1610C.
Refer to the section within this manual called
in the
section for
instructions on installing this software.
If you have a CS3200C, install GageBit software.
Refer to the section within this manual called
in the
for instructions on installing this software.
13
Run GageScope software and start acquiring data (not applicable for CS3200C).
Follow the instructions provided in the GageScope manual for using this software.
14
(Optional) Writing your own program using Gage Software Development Kits (SDKs).
When writing your own program using one of Gage’s Software Development Kits (SDKs), please refer to
the appropriate Gage SDK manual for information on installation and operation of the Gage SDK.
Summary of Contents for CompuScope 85GC
