CompuScope 82GC
91
EXTERNAL TRIGGER
Impedance: 1
M
Ω
, 25 pF
Amplitude:
Absolute Max ±15 V
Voltage Range:
±1 V and ±5 V
Bandwidth: 300
MHz
Coupling:
AC or DC
Connector: BNC
TRIGGER OUTPUT
Signal Type:
TTL
Active Edge:
Rising (low-to-high)
Synchronization:
Synchronized to on-board system clock
INTERNAL CLOCK
Source:
1 GHz SAW oscillator
Accuracy:
± 200 ppm
EXTERNAL CLOCK
Maximum Frequency:
1 GHz
Minimum Frequency:
10 MHz
Signal Type:
Sine wave
Connector: SMA
Signal Level:
MIN 225 mV RMS
MAX
500
mV
RMS
Impedance: 50
Ω
Sampling Edge:
Single:
Rising
and
Falling
Dual:
Rising
Coupling: AC
Duty Cycle:
50% ±5% Single/Dual
MULTIPLE RECORD
Pre-trigger Data:
Up to 32K points
Record Length:
256
(512)
points minimum.
Can be defined with a 128
(256)
point resolution in dual
(single)
channel mode
Max. number of Triggers: 21,845 with 16M model
Re-arm time:
152
(304)
sample clock cycles in dual
(single)
channel mode
MULTI-CARD SYSTEMS
Operating modes:
Master/Slave or Multiple Independent
Number of Cards
Master/Slave:
2
cards
Multiple/Ind.:
Limited by backplane
Maximum Number of Channels in Master/Slave Mode:
4 at 1 GS/s
2 at 2 GS/s
Summary of Contents for CompuScope 85GC
