Gage CompuScope 85GC, Hardware Manual And Driver Installation Manual

Page: 102 / 174

96 CompuScope 82GC
CompuScope 82GC: identifying your CompuScope card(s)
Your CompuScope 82GC card is composed of the CS82GC base board and the CS82GC analog board.
You will find your CompuScope 82GC card type and version as shown in Figure 58 and Figure 59. Figure 58
also shows the location of the Calibration label. The Calibration label lists your CompuScope card’s serial
numbers. You should record these serial numbers for future reference on the technical support form found at the
front of this guide.
You may also see an “OPTION/MOD” label listing any upgrades or modifications that have been performed on
your card. For example, if you have purchased a CompuScope 82GC-8M card, the “OPTION/MOD” label will
list “8M” as an option.
Figure 58: CS82GC labels