GAELCO Ring Riders, Operator'S Manual

Page: 53 / 95

53
GAELCO - RING RIDERS
1) PROBLEM:The machine does not start when the mains switch is thrown.
CHECKS
•
Check the mains cable and its connections.
•
Check the fuses. Check that the specifications are met. Check whether the fuses have
blown and that they have the correct current rating (10A). The fault may have been
caused by an overload current.
•
Check the CPU connections
•
Check there is +5V DC in the power supply.
2) PROBLEM:There is something wrong with the screen colours and/or image.
CHECKS
•
Enter in Test Mode and adjust the monitor settings with the help of the screen test
(see Section 6.1)
3) PROBLEM:The game starts but the bike fails to move.
CHECKS
•
Check the emergency stop button is not pressed.
•
Check the player is pressing both footrests correctly.
•
Check the motion system from the MOTION SYSTEM menu (see section 6.3). If the
bike moves when you select the option
Motion test , the problem could be caused by a
fault in one of the footrest switches. If the bike does not move on Motion test, go ahead
with the next checks:
•
Check that the connections between the monitor casing and the game platform are not
loose and that the wires are undamaged.
•
Check that the motor driver works properly, checking the error messages (see section
9.10)
4) PROBLEM:The bike moves but not in synchronism with the image on the monitor.
CHECKS
•
Enter the MOTION SYSTEM screen in Test Mode and check that, when the platform is
horizontal, the
Position reading is near to 128. If this is not the case, check the position
potentiometer following the procedure described in Section 9.13.
•
Check that the position potentiometer (B, in section 9.12) is not loosen.
•
Check that the gears of the potentiometer work fine.
5) PROBLEM:The platform moves very slowly the whole time.
CHECKS
•
Check the position potentiometer is working properly (B, in section 9.12) and that none
of the connctions are loosen.
9.14 TROUBLESHOOTING PROCEDURES