GAELCO Ring Riders, Operator'S Manual

Page: 26 / 95

GAELCO - RING RIDERS
26
This screen allows you to check the whole sound system.
6.4 SOUND TEST
SOUND
Volume: 50%
Bass level: 30%
Left loudspeaker: OFF
Right loudspeaker: ON
Subwoofer: OFF
Rear loudspeakers: OFF
Sample number: 0
Test
Exit
The options
Forward
and
Reverse
allow you to check the position of the bike for
maintenance purposes. The bike can move slowly or fast, depending on the throttle
regulation.
The
Motion test
option performs an automatic check of the steering motor and the
motion motor. The bike goes up and down while the handlebar turns to the left and
to the right. We aware when selecting this option with the throttle, as the handlebar
will turn inmediately.
The vibrator can be also tested by selecting the
Vibrator test
option and twisting the
throttle.
The
Check error log
option allows you to check the last 10 error messages stored in
the buffer of the motor driver. The message UU is not about a fault, actually. It is
just the notice of the voltage drop that occurs each time you switch off the machine.
For maintenance purposes, please refer to the section 9.10 .
To return to the main menu, select
Exit
and twist the accelerator grip.
The
Volume
is ajusted by the Volume switch placed on the Control Panel.
The remaining options are selected by pushing the START/VIEW buttons, then activated
with the throttle. Each loudspeaker can be tested by selecting ON.
The
Bass level
is adjusted by rotating the throttle. Each twist encreases 10%.
The
Sample number
option allows you to hear the different sounds used in the game.
The
Test
option reproduces 5 seconds of sound exhibition.
To return to the main menu, select
Exit
and twist the accelerator grip.