GAELCO Ring Riders, Operator'S Manual

Page: 22 / 95

22
An automatic check of the memories is made when the machine is switched on. This
coincides with the presentation of the Screen Test. After a few seconds, if no error occurs, it
automatically goes on to show the game. The interface is also adjusted dynamically each
time that a machine is switched on. Any other adjustment should be made in TEST MODE.
The access to the TEST MODE as for the other controls -monitor, sound, etc.- is made
from the CONTROL PANEL, which is situated behind the coin box door. This panel
consists of a button to access TEST MODE, a coin counter, a SERVICE button, and a
commuter to adjust the VOLUME of the loudspeakers.
Pressing the TEST button enters TEST MODE, where the game variables, such as level
of difficulty, linkage of machines, etc., can be adjusted. A check of the motion system and
other controls can also be made. The SERVICE button allows the technician to introduce
game credits without moving the coin counter.
The main menu of TEST MODE offers the following options:
Screen test
Input / Output
Motion system
Sound
Settings
Reset high scores
Book-keeping
Exit and save
Exit without saving
You can choose the option required by pushing the VIEW button (the cursor moves up) or
the START button (the cursor moves down). The selection is confirmed when you twist the
accelerator grip (throttle).
To make sure that the changes that have been made are kept permanently, you must not
switch off the machine without first leaving TEST MODE with the option
Exit and save
.
WARNING!
The option
MOTION SYSTEM ERROR LOG
may appear on the main menu if the
motor driver detects any fault. The error messages can be read by selecting that option.
For more information please refer to sections
6.3 and 9.10 of this manual.
GAELCO - RING RIDERS
6. PROGRAMMING THE MACHINE AND TEST MODE