GAELCO - RING RIDERS
40
9.5.2 SENSOR ADJUSTMENT
To adjust the sensor proceed as follows:
•
Switch off the machine.
•
Remove the steering mechanism, as explained in section 9.4 of this chapter.
•
Loosen -just a bit- the screws that fix the sensor board. The right hole of the board
allows you to move it up and down a few millimeters, pivoting on the left screw. The idea
is to hold the board in a way that allows you to move it, but the friction force keeps it in
any wanted position during the adjustment.
•
Connect the sensor board, switch on the machine and select the
Input / Output
screen.
•
Press the brake handle until it is
16mm
close to the grip, approximately. Using an object
of that thickness can be very helpful during the tuning process.
16mm
Summary of Contents for Ring Riders
