54
GAELCO - RING RIDERS
6) PROBLEM:The throttle does not work.
CHECKS
•
Check the throttle operation on the INPUT / OUTPUT screen of Test mode. If the
reading does not changes when you twist the grip, check the cable.
•
Twist the grip, then leave it: the grip should twist back to the rest position. If this is not
the case, check the the cable, the spring that pulls it and the pulley wheel.
•
IIf the mechanic transmission is OK, check the potentiometer placed on the steering
mechanism.
7) PROBLEM:The machines do not work when they are linked up.
CHECKS
•
Check that the link cable properly connects the machines.
•
Follow the instructions in Section 8.
8) PROBLEM: There is no sound or it is of poor quality.
CHECKS
•
Change the volume on the Control Panel.
•
Carry out a sound test (see Section 6.5)
•
Check the connections.
9) PROBLEM: There is no feedbak on the handelabar. The vibrator does not work.
CHECKS
•
Check the fuses of the Power board (RIN-358). If the fuses are blown, it is likely that the
power transistors are damaged.
TECHNICAL ASSISTANCE
e-mail: [email protected]
tel. 93 4173626
Summary of Contents for Ring Riders
