GAELCO Ring Riders, Operator'S Manual

Page: 51 / 95

GAELCO - RING RIDERS
51
If the bike does not move properly, and the troubleshooting leads to a possible fault in
the position potentiometer (RIN-850), proceed as follows:
1. Disassembly the protection hood, as explained in the previous section (9.12). The
drawing below shows the position potentiometers. The potentiometer A detects the
lateral leaning made by the player, while the potentiometer B detects the pitch position
generated by the motor.
9.13 CHECKING THE POSITION POTENTIOMETERS
2. To check the potentiometer B enter the MOTION SYSTEM screen in Test Mode. Then,
using the options
Forward
/
Reverse
and the throttle grip, put the bike platform in horizontal
position. When the shaft crank is positioned as shown in the next page drawing, the
reading of the
Position
line should be close to 128 .
MOTION SYSTEM
Speed: 0.00
Position: 128
Security: released
Forward
Reverse
Motion test
Vibrator test
Check error log
Exit