background image

Contents

Digivice

Battery Cover

Instruction Sheet

Cautions

Name of Parts

Digivolve 

Dialogue Button

 Dialogue Button

Belt Hook

Battery Cover

ON/OFF

Music Button

How to Insert Batteries 

(Recommend alkaline batteries only, adult assembly required)

Please confirm the switch is X(OFF) 

before inserting batteries.

Instuctions Sheet

2 AAA batteries required (sold separately).

Age 15+

Color, styles may be vary from the images in this instruction sheet

Japanese Speak Only

CAUTION: Changes or modifications to this unit not expressly approved by the 
party responsible for compliance could void the user's authority to operate the 
equipment. NOTE: This equipment has been tested and found to comply with the 
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.  These 
limits are designed to provide reasonable protection against harmful interference 
in a residential installation.  This equipment generates uses and can radiate radio 
frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. However, 
there is no guarantee that interference will not occur in a particular installation.  If 
this equipment does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following 
measures- Reorient or relocate the receiving antenna. Increase the separation 
between the equipment and receiver. Connect the equipment into an outlet on a 
circuit different from that to which the receiver is connected. Consult the dealer 
or an experienced radio TV / technician for help. 
This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions: (1) this device may not cause harmful interference, and 
(2) this device must accept any interference received, including interference that 
may cause undesired operation. 
CAN ICES-3 (B)/NMB-3(B)

MADE IN CHINA

Manufactured for Bandai America Incorporated,

2120 Park Place, Suite 120,El Segundo, California 90245

Actual size, color, style and decoration may vary. Bandailogo: ® and © 2020 Bandai. Package: 
© 2020 Bandai.

©Akiyoshi Hongo, Toei Animation

• The target age of the product is over 15 years old. Never give to children under the target age without adult guidance.
• “Please pay attention when you use this product if you have a pacemaker as it contains electronic components,   
     speakers, magnets etc.”
• Do not keep watching the blinking LED light. You may feel sick.
• (If you use the battery incorrectly, it may cause heat generation, damage, or leakage. Please note the following.)
• If the fluid leaking from the battery gets into your eyes, immediately wash your eyes with a lot of water and consult a 
   doctor. If it gets on your skin or clothes, wash it with water.
• “Only use batteries of the same or equivalent type as indicated.  Batteries must be inserted with the correct polarity.  
•  Do not short-circuit the supply terminals.  Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries, or 
different type of batteries. Do not mix new and used batteries.  Remove batteries when not in use or discharge.”
• “Store unused batteries in their packaging and away from metal objects which can cause a short-circuit.”
• This product is made precisely. It may be damaged if excessive force is applied or dropped.
• “Do not place in water or fire, disassemble, or solder.  Stop use if the product or the battery becomes wet.  This may 
    cause a short-circuit.”
• Discard plastic packaging immediately after opening.
• Do not place this product on a resin sofa, seat, tile, etc. Intention may change if you are in contact for a long time.
• Do not pull or bend the moving part or mounting part in an unreasonable direction.
• Please be aware that some of the Japanese pronunciations may have different intonations or may be difficult to hear 
   due to the characteristics of the product. 

1. Loosen the screw on the battery cover by turning it 

with a screwdriver in the direction of the arrow, and 

lift the battery cover upward to remove it.

(Because the battery cover is removed when opening 

the package, start from step 2 when inserting 

batteries for the first time.)

2. Make sure to insert two AAA (1.5V) 

alkaline batteries (sold separately), and 

make sure to match the + and - signs.

3. Fit the protrusion of the battery cover 

into the crevice of the main unit and 

close it firmly.

Sleep Mode

How to Turn On

When you don't use the device for 15 seconds, it goes into Sleep Mode after playing a 
sound effect. To end Sleep Mode, press any button, and you will hear a character's voice.

When the power switch on the back of the main unit is 

turned ON(O), a sound effect is produced and the LED 

inside the main unit lights up. Please be sure to turn OFF(X) 

the power switch after playing.

Replace the batteries if the sound is low, the LED light is weak, or sounds are repeating.

Digimon Official Site (Japanese)

Front

Back

Screwdriver

Screw

Crevice

Crevice

Ukatsu da zo, Taichi!

Yamato! Socchi koso motto 

hayaku koi yo!

Omae to chigatte, iroiro yaru 

koto ga aru n da yo.

Kita yo! Taichi!

Iku zo! Agumon!

Protrusion

Protrusion

Reviews: