Fuso FEG-881, Operation Manual

Page: 76 / 112

- 72 -
Satellite Info. Item Input Range Description
1.Initial Pos. LAT: 90°N ~ 90°S
LON: 180°E ~
180°W
User can set up the information on the own ship position.
Ex) When cannot receive GPS, DGPS
signal, the information on the current position of own ship can be
input.
2.Date/Time Set Date, Time User can set up the information on the weather and time
Ex) In case of not being capable to receive GPS, DGPS signal,
the information on the current date and time can be input.
3.UTC Correction ±00:00 ~
±23:59
User can set up the local time differences.
In inputting '00:00' , it means Universal Time Chart(UTC) and "U"
is indicated at the next to the plotter screen. In inputting 'Local
Time Differences', it means the current time of the area and "L" is
indicated at the next to the plotter screen. For Korea,+09:00
should be input.
4.Setting 12/24 12Hour/24Hour User can set up the indication way of 24-hours or noon/afternoon
12-hours time system.
5.Speed Mode Low/Mid/High Average ship speed can be set up.
Normally ‘Mid’ speed is selected.
6.SBAS Mode Auto/Manual/ SBAS: The system which receives the position signal and
Position compensation information which were received from
The Geostationary satellite with the same antenna.
And obtains the degree of correctness more than DGPS.
Automatic: receive SBAS when possible to navigate SBAS
Manual : not receive SBAS
7.Antenna Height -1000 ~ +999 The height from the sea surface to GPS antenna can be set up.
Normally it is set up at 10m.
8.Datum Set Selection Range
Available
The geodetic can be set up to match the measured lat/log. with
the lat/log. of the chart.
【
Note
】☞
How to move the selection menu of the geodetic
In moving to select the geodetic, move ( ) buttons up & down in a unit,
press, ( )buttons to move up & down in ten units.