Fuso FEG-881, Operation Manual

Page: 61 / 112

- 57 -
If set up a range of Anchor Alarm to [2.SET]
¨
[2.ALRAM SET]
¨
[3.ANCHOR ALARM],
the range of anchor alarm show as a red circle in a plotter screen. Besides,
the relative information as such Lat/Lon, direction, break away distance etc.
with set up “ANCHOR” in a bottom-left of the Plotter screen are shown.
( Refer to 'Chapter 3. 5. Plotter Screen')
☞
If the vessel breaks away from a range of anchor alarm, the alarm sounds and
the red circle blinks in order to advise of the vessel’s break away from the range.
For 'ANCHOR ALARM', move [2.SET]
¨
[1.NAVIGATION SET]
¨
[4.EXIT WPT/RTE/ANCHOR]
and press ( ) button or press ( ) button.
( Refer to '2.1.4 How to clear navigation')
☞
【
NOTE
】☞
If the anchor alarm is set off, the red circle and alarm don
’
t take place in a plotter
screen.