Fuso FEG-881, Operation Manual

Page: 74 / 112

- 70 -
Miscellaneous Setup
Items
Input Range Description
1. Distance Unit NM/KM/MM Select the distance unit on the Display.
NM: Nautical Mile (1NM = 1,852 m)
KM: Kilometer (1KM = 1,000 m)
MM: Land Mile (1MM = 1,610 m)
2. Magnetic Yar. True/Magnetic
E00.0°~ E99.9°
W00.0°~ W99.9° True North differs slightly from Magnetic
North, This is 'Magnetic Bearing
Deviation' and it varies slightly based on
the earth point. In using Magnetic North, it can be
corrected by inputting ‘Magnetic Bearing Deviation’.
3. Course-Up Set Auto/Course/North/
East/South/West To set up the direction of the map display.
AUTO: Same as the own ship heading
COURSE: Same as the destination
NORTH/EAST/SOURTH/WEST
: North direction based on the preset Plotter map
7. Position Print 00 Min. 00 Sec. ~
60 Min. 00 Sec. To print the own ship position, speed, bearing at the
intervals of preset time. When not using this function, it
is 00 Min. 00 Sec.
9. Password Set 0000 ~ 9999 To set up Password for the system approach.
When not using this function, it is is '0000'.
Note: Default value is '0000'.
【
Note
】☞
Bearing Deviation
As for [2. MAGNETIC YAR], True North should be used as it is always automatic, except when
Magnetic should be used.
Instance of Bearing Deviation
If GPS data bearing is 270 degrees and magnetic compass bearing is 280, input (+)E10.0 to display
the same as magnetic bearing because the difference is +10. If GPS data bearing is 280 degrees and
magnetic compass bearing is 270 degrees, input (-)W10.0 because the difference is -10.